Nice colors, high speed printing...
BUT!!!
Dangerous to use at home... had to put on a table in the basement and when I want to use it have to take it outside... no need to say can't use it when it's snowing, raining, cold etc...
Very easy setup. Been printing hours a day since I got it. Very impressed with price and performance.
É uma máquina espantosa, e só escolher a impressão e mandar imprimir!
A único senão é não termos total controlo na temperatura e velocidade durante a impressão.
Ela é rápida ou melhor rapidíssima, e a qualidade de e impressão é TOP
I found this printer is a great multi coloured printer once you have mastered the slicing and painting process. It does take time to print (8hours for the test fish) and with the size of the fish (quite small) there is a lot of waste . But I’ve printed quite a few other items and it is very fast especially if only using 1 colour. I haven’t managed to pair it with Cura ultimate or Creality slicer as the AD5X isn’t shown but as I get more experience I think I can get it to work with the other slicers. Overall I am very pleased with the machine
I love this printer. I was able to use it without issues right out of the box. It's self levelling and easy menus make this a dream. Definitely my favorite printer now. It can also switch between types of filament without any headache. I wish I had one of these twice the size now
The more I use it and become familiar with it, the more amazed at what this thing does! Good quality machine!
All of the Flashforge machine are of the highest quality, economical to operate and maintain, trouble free, and provide the best value for the dollar of any 3D printer on the market today. I have 2 5M's and one 5X that run non-stop without issue. Thank you Flashforge for your contributions to the 3D printing community. Hands down an improvement of the other brands I also own.
I have a 5M and now the ADX5 , both have been great. Over 1000 hours on 5M 0 problems.
This is my first 3D printer. So far it is awesome. The AD5X does everything I want it to. It is a great price. The more I print with it the more possibilities I see.
I love my 5M Pro. Just wish they would make a multifilament extruder for this printer as an option. Just saved for this one before they came out with the Ad5x.
Upgraded from a basic 3d printer that I’ve had for years. What an amazing difference. The auto bed leveling, fast setup, WiFi printing, not to mention the 4 color printing. Could not me happier with my purchase.
Overall, this is a great, solid 3D printer. However, there are a few drawbacks that would be nice to see addressed in future updates.
One of the biggest issues is the amount of filament waste when swapping colors, which can add up over time. Additionally, the limited on-printer controls and monitoring features make it difficult to manage prints directly from the machine and even harder remotely.
It would also be a significant improvement to see an updated version of the included OrcaSlicer. The current version is outdated and, unlike the standard version of OrcaSlicer, lacks support for Linux.
Finally, it would be a huge benefit if the printer included a USB port to allow for the addition of a Raspberry Pi. This would enable users to run Mainsail with the AD5X Klipper firmware, giving them much better remote and local monitoring.
I pronted this to get myself used to using the machine as the files were already to go. It was accurate when i put it together i had no issues, all screws and parts lined up well.
Received quickly, was very impressed how easy it was to fit the camera i did it myself and i am not technical. I am really enjoying how i can leave the room and still watch my project is still running.
Very happy with product, it arrived in good timing. I plan the buy the hole set.
When I ordered the AD5X I knew I would want the enclosure so they were both ordered together. I knew I was just getting the plexiglass and the hardware kit for the enclosure. So I then downloaded the MF files from flashforge for the parts that I needed to print for the enclosure. Wow flashforge did an amazing job getting these files done tolerances were perfect . I printed the files in PETG and the are great. I also bought the camera for this printer due to i did not want to install the camera after the enclosure, well I forgot put the enclosure together and the saw the camera on my desk. To my suprise flashforge eleven thought of that. The camera install took 2 minutes due to the enclosure had the **** hole in it for the camera install. Great job Flashforge.
Good enclosure kit (acrylic panels and fixings only) the corner pieces and other parts are self printed, I used 0.8 nozzle the parts come out perfect fit and very strong.
A bit pricey with shipping to U.K (64.99) but great for keeping sound/smells in and dust/debri out of printer.
Assembly video Ali_Chair on Youtube :-)
Excellent product. The enclosure kit was easy to put together. Printing the frame was easy to follow.
nicely packed, the system is almost plug and play, quality printing
2nd machine ordered looking forward for the 3rd machine, good quality 3D machines, .04mm printing is awesome! so far no trouble at all in two months operation comparing to our 3D machines solid operation
This light is very bright. It lights up my AD5M wonderfully. We'll worth the money, especially if you have an enclosure.
Love this thing. As a senior, this was easy to run. lots of trial and error but still fun.
Prints great out of the box. Easy setup!! Awesome
Just what I ordered and was expecting! All the parts and pieces except what you need to 3D print! Look for the extended enclosure top files on some of the other share sites!
